Temperature Calibration Tower

Generate G-code scripts for temperature calibration tests

Settings

Material Preset

Start Temperature

°C

Usually the higher temp

End Temperature

°C

Usually the lower temp

Temperature Step

°C

Layer Height

mm

Layers per Temperature Block 25 layers × 0.2mm = 5mm per temp block

Slicer

Need a Temperature Tower STL?

Download from popular sources:

Thingiverse Printables

How to Use

Select your material preset or enter custom temperatures
Choose your slicer for specific instructions
Generate the G-code script
Download a temperature tower STL
Slice the STL and add the temperature changes
Print and evaluate results!

Tips

Start high, end low - Most towers print from bottom to top
5°C steps are usually enough to find optimal temp
Look for: stringing, bridging, overhangs, surface quality
Best temp has clean bridges, minimal stringing, good detail